Kia Optima Manuals

Kia Forte: Rear Seat Belt Buckle Replacement - Rear Seat Belt - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Seat Belt Buckle Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Buckle Replacement

(4Door)
[LH]
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle [LH] (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
[RH]
1.
Remove the rear center seat belt retractor.
(Refer to Rear Seat Belt - "Rear Center Seat Belt Retractor")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle [RH] (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(5Door)
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

[RH]
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
Rear Seat Belt Buckle Component Location
(4Door) 1. Rear seat belt buckle [LH] 2. Rear seat belt buckle [RH] (5Door) 1. Rear seat belt buckle [LH] 2. Rear seat belt bu ...

Body Electrical System
...

See also:

DC/DC Converter Description
Due to the considerably more frequent occurrence of starting operations, the electrical load that occurs often leads to voltage dips in the vehicle network. In order to stabilize the power s ...

Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor' ...

Checking the brake/clutch  fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* ...

Categories

Copyright www.kifomanual.com 2014-2026