Kia Forte: Seat Belt Switch Description - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Seat Belt Switch Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Seat Belt Switch Description

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follows. If the seat belt or door is opened, the engine must not be started or stopped by the ISG function for safety reasons.
Door Switch Installation
1. Install in reverse of removal. ...

Seat Belt Switch Inspection
1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

See also:

Front Washer Motor Installation
1. Install the washer reservoir.    Before installing the pump motor, check ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Instrument panel overview
1. Instrument cluster 2. Lighting control lever 3. Audio remote control buttons 4. Horn 5. Driver's front air bag 6. Cruise control button 7. Wiper and washer control lever 8. Ignition ...

Copyright © www.kifomanual.com 2014-2023