Kia Forte: BCM Diagnosis With GDS - BCM (Body Control Module) - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: BCM Diagnosis With GDS

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / BCM (Body Control Module) / BCM Diagnosis With GDS

1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator.
2.
To diagnose the BCM function, select the menu of model and body control module.
3.
Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
A.
BCM service data, CLU service data, SJB service data
4.
If you will check each module data operation forcefully, select "Actuation test".

5.
If you want to change user option, select “user option”.

Installation
1. Install the BCM unit. 2. Install the center lower cover. 3. Install the floor console assembly. ...

IMS (Integrated Memory)
...

See also:

Mode Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body -"Crash Pad Lower Panel") ...

Exterior care
Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. CAUTION - H ...

Front Washer Motor Installation
1. Install the washer reservoir.    Before installing the pump motor, check ...

Copyright © www.kifomanual.com 2014-2020