Kia Forte: Body (Interior and Exterior)
Steering Angle Sensor
SpecificationsBlower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Installation
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST(09581-11000).
...