Kia Forte: Brake System

Installation

1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Specifications

Item Specification Master cylinder Type Fixed seal Cylinder I.D. 22.22 mm Piston stroke 45 ± 1 mm (1.77 ± 0.039 in) ...

See also:

Dynamic Damper Components
1. BJ assembly 2. Circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 1 ...

Tightening Torques
Engine Control System Item kgf.m N.m lb-ft ECM installation bolt 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 ECM bracket ins ...

Emergency starting
Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehic ...