Kia Forte: Removal - Concentric Slave Cylinder Assembly - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Concentric Slave Cylinder Assembly / Removal

1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the concentric slave cylinder assembly from the transaxle case by removing bolts (A).

Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

Component
1. Concentric slave cylinder assembly 2. Manual transaxle ...

Installation
   • Install the concentric slave cylinder bolts. Not to be bent or twisted, Tighten them ...

See also:

Front Stabilizer Bar Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Speakers Removal
Front Speaker 1. Remove the front door trim panel and speaker connector. (Refer to Body - "Front Door Trim") 2. Remove the ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C control unit. (Refer to Heating,Ventilation, Air Conditi ...

Copyright www.kifomanual.com 2014-2026