Kia Forte: Control Shaft Complete Description - Manual Transaxle Control System - Manual Transaxle System - Kia Forte TD 2014-2019 Service ManualKia Forte: Control Shaft Complete Description

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Description

Component location : Control shaft assembly is mounted on the top of the manual transaxle

Function : Change the gear by shifting a shift lever.
Control Cable Adjustment
Select cable adjustment 1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin. 2. ...

Control Shaft Complete Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

See also:

Accelerator Position Sensor (APS) Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Fuel Tank Installation
1. Install in the reverse order of removal. Fuel tank band installation nut: 39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...

Tightening Torques
Engine Control System Item kgf.m N.m lb-ft ECM installation bolt 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 ECM bracket ins ...

Copyright © www.kifomanual.com 2014-2019