Kia Forte: Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. Transaxle Control Module (TCM) controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components Location

1. Radiator 2. Mounting insulator 3. Valve body cover 4. Oil cooler tube 5. Automatic transaxle 6. Radiator upper mounting bracket 1. Automatic tra ...

See also:

Sunroof Switch Inspection
1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp assembly (A) after loosening 2 screws. ...

Shift Cable Components
1. Shift lever knob 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

Engine Room Under Cover Removal and Installation
1. Remove the under cover front panel (A). 2. Remove the under covers (B). Tightening torque: 3.9 ~ 5.9 N ...