Kia Forte: Hydraulic System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Hydraulic System

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System

Installation
1. Install in the reverse order of removal.    If the oil seal on the transaxle case side is da ...

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes ...

See also:

Fuses
Data on the replacement fuse must match the data on the defective fuse. The three fuse boxes are located in: engine compartment instrument panel Before replacing a fuse, turn off the respective ...

Knock Sensor (KS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). ...

Telemetics Unit (TMU) Inspection
1. After replacing the TMU unit, access Dealer Engineering Mode in head unit. (Refer to MTS system - "TMU Dealer Engineering Mode") 2 ...

Copyright © www.kifomanual.com 2014-2021