Kia Forte: Spark Plug Specification - Ignition System - Engine Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Spark Plug Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Ignition System / Spark Plug Specification

Item
Specification
Type
SILZKR7B11
Gap
1.0 ~ 1.1
(0.0394 ~ 0.0433)

Spark Plug Description
A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by mean ...

Spark Plug Inspection
[On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...

See also:

Control Cable Removal
1. Remove the floor console assembly. (Refer to Body - " Floor Console") 2. Remove the select cable (B) by removing the snap ...

SS-A Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-A is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-A is installed at valve body. ...

Rear Torsion Beam Axle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...

Copyright © www.kifomanual.com 2014-2025