Kia Forte: Rear Door Trim Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Be careful not to scratch the door trim and other parts.
|
|
|
1. |
Using a screwdriver or remover, remove the rear door inside handle
cap (A).
|
|
2. |
Remove the rear door pull handle cap (B).

|
|
3. |
After loosening the mounting screws, then remove the rear door
trim (A).

|
|
4. |
Remove the rear door inside handle cage (A).

|
|
5. |
Disconnect the power window switch connector (A).

|
|
6. |
Install in the reverse order of removal.
|
• |
Make sure the connector is connected properly.
|
|
• |
Make sure the door locks/unlocks and opens/closes
properly.
|
|
• |
Replace any damaged clips.
|
|
|
(4Door, 5Door)
1. Rear door trim
...
(4Door, 5Door)
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the moun ...
See also:
Heater & A/C Control Unit (DATC) Component
Connector Pin Function
Connector
No.
Description
Connector
No.
Description
A
1
Illumination (+) (Tail)
A
...
BJ Boot Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...
Illuminated ignition switch (if equipped)
Whenever a front door is opened, the ignition switch will illuminate for your
convenience, provided the ignition switch is not in the ON position. The light will
go off immediately when the igni ...