Kia Forte: Radiator Grill Replacement
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
|
2. |
Disconnect the front ultra sensor connector (A) and front bumper
mounting wiring harness (B).
|
3. |
Detach the clips (A), then remove the front bumper energy absorber
(B).
|
4. |
Loosen the radiator grill mounting screws.
|
5. |
Unlock the lock pins (B) by pushing it up with a screwdriver or
remover and then remove the radiator grill (A).
|
6. |
Install in the reverse order of removal.
• |
Make sure the connector is plugged in properly.
|
• |
Replace any damaged clips.
|
|
|
(5Door, 2Door)
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
|
2. |
Loosen the radiator grill mounting screws.
|
3. |
Unlock the lock pins (B) by pushing it up with a screwdriver or
remover and then remove the radiator grill (A).
|
4. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(4Door)
1. Radiator grill
(5Door, 2Door)
1. Radiator grill
...
See also:
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Seat Belt Buckle Sensor (BS)
The SRSCM shall monitor the status of the driver and passenger seat belt
buckle. The SRSCM provides one pin each for the driver and passenger seat belt
buckle status input. The seat belt buck ...
Sound settings
Press the
key
Select
[Sound] through
TUNE knob or key
Select menu through
TUNE knob
Sound Settings
This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and
B ...