Kia Forte: Multimedia Jack Installation - AVN System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Multimedia Jack Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / AVN System / Multimedia Jack Installation

1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.
3.
Install the floor console assembly.
  
Make sure the multimedia connector and the floor console assembly connectors are plugged in properly.
Multimedia Jack Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly&quo ...

Troubleshooting Guide
Before Thinking The Product Has Malfunctioned 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual de ...

See also:

Engine Control Module (ECM) Removal
   When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. ...

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

If you have a flat tire (If equipped)
Jack and tools The spare tire, jack, jack handle and wheel lug nut wrench are stored in the luggage compartment. Remove the luggage under tray out of the way to reach the equipment. (1) Jack h ...

Copyright www.kifomanual.com 2014-2026