Kia Forte: Weight Classification System (WCS)

WCS is intended to detect the occupant’s physique in order to determine whether the passenger airbag should be suppressed or deployed. WCS classifies the front passenger side seat by measuring physical weight loaded onto the front passenger side seat. It is composed of 2 weight sensors of strain gauge type and an ECU which gathers information of weight sensors, calculates the measured weight and makes decisions of the classification of the passenger. It is installed on the left side (inner position in vehicle) of the seat track assembly fastened with respective mounting bolts and nuts.

Installation

   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Components

...

See also:

Oil Pan Installation
1. Install the oil screen (A) with a new gasket (B). Tightening torque Bolt : 19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb ...

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...

Troubleshooting
Problem Possible cause Solution Not pairing Bluetooth device of Car is not discoverable mode Enter Bluetooth pairing (searching) mode Userâ ...