Power Seat Motor |
1. |
Remove the seat and all motor connectors.
A : Slide motor
B : Height motor
C : Tilt motor
D : Recline motor
E : Lumbar support motor
|
2. |
With the battery connected directly to the motor terminals, check
if the motors run smoothly.
|
3. |
Reverse the connections and check that the motor rotates in reverse.
|
4. |
If there is an abnormality, replace the motors.
|
Rolling code programming
To train a garage door opener (or other rolling code equipped devices) with the
rolling code feature, follow these instructions after completing the "Programming"
portion of this text. (A ...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the manual transaxle.
(Refer to Manual ...
Head Lamp Leveling Actuator Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
Below content summarize the procedure for A/S using GDS.
No.
Procedure
1
Locate vehicle to flat ...