Kia Forte: Turn signals and lane change signals - Lighting - Features of your vehicle - Kia Forte TD 2014-2019 Owners ManualKia Forte: Turn signals and lane change signals

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Owners Manual / Features of your vehicle / Lighting / Turn signals and lane change signals

The ignition switch must be on for the turn signals to function. To turn on the


The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating. They will self-cancel after a turn is completed.

If the indicator continues to flash after a turn, manually return the lever to the OFF position.

To signal a lane change, move the turn signal lever slightly and hold it in position (B). The lever will return to the OFF position when released.

If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.

If an indicator flash is abnormally quick or slow, a bulb may be burned out or have a poor electrical connection in the circuit.

One-touch lane change function

To activate an one-touch lane change function, move the turn signal lever slightly and then release it. The lane change signals will blink 3, 5 or 7 times.

✽ NOTICE

If an indicator flash is abnormally quick or slow, the bulb may be burned out or have a poor electrical connection in the circuit.

Front fog light (if equipped)

Fog lights are used to provide improved visibility when visibility is poor due


Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow, etc. The fog lights will turn on when the fog light switch (1) is turned to the on position after the headlights are turned on.

To turn off the fog lights, turn the switch (1) to the off position.

When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor.

Daytime running light 
Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, and it is especially helpful aft ...

Wipers & Washers
A : Wiper speed control (front) Ј HI Ц High wiper speed Ј LO Ц Low wiper speed Ј INT Ц Intermittent wipe Ј AUTOЦ Automatic control wipe Ј OFF Ц Off Ј MIST Ц Single wipe B : Interm ...

See also:

Relay Box (Passenger Compartment) Description
Smart Junction Box(SJB) 1. General function : Interior Junction Box + some functions of BCM It controls loads with CAN communication and IPS. 2. ...

Delivery Pipe Installation
1. Install in the reverse order of removal. Delivery pipe installation bolt: 18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft) ...

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes ...

Copyright © www.kifomanual.com 2014-2019