Kia Forte: License Lamp Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / License Lamp Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the lens (A) after loosening the mounting screws.
|
| 3. |
Remove the license lamp (B) after disconnecting the connector
(A).
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
License Lamp Installation
1.
Connect the connector.
2.
Install the license lamp.
...
See also:
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bo ...
ETC (Electronic Throttle Control) System Specification
Throttle angle (В°)
Output voltage (V) [Vref = 5.0V]
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.4 ...
Adjustment
How To Initialize
1.
Check that the glass has been installed.
A.
Finished height adjustment.
2.
...
Copyright © www.kifomanual.com 2014-2025