Kia Forte: Front Fog Lamps Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Remove the front fog lamp connectors (A) from the front bumper.
[LH]
[RH]
|
| 4. |
Remove the front fog bulb (A) turning it in the counterclockwise
direction.
|
| 5. |
Remove the front fog lamp assembly (A) after loosening the screws.
|
Front Fog Lamps Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Swit ...
Front Fog Lamps Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper cover.
...
See also:
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which tur ...
Outside Rear View Mirror Component Location
(4Door, 5Door)
1. Outside rear view mirror
(2Door)
1. Outside rear view mirror
...
Copyright © www.kifomanual.com 2014-2025