Kia Forte: Auto Light Sensor Installation

Auto Light Sensor Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver. ...

Auto Head Lamp Leveling Device

...

See also:

Rear Hub - Carrier Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Compression Pressure Inspection
   If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. ...

Installation
1. Install in the reverse order of removal. 2. Rotate the caliper piston and push the direction of the arrow. 3. ...