Kia Forte: Auto Lighting Control System

Specifications

Items Specifications Rated voltage DC 5V Load Max. 1mA (When head lamp lighting) Illuminations (LUX) 50 1.42 ± 0.31V ...

Component Location

1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. Body control module (BCM) ...

See also:

Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

PTC Heater Inspection
Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode ...

Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...