Kia Optima Manuals

Kia Forte: [CVVT System Mode] - Cylinder Head Assembly - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: [CVVT System Mode]

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cylinder Head Assembly / [CVVT System Mode]

(1) Low Speed / Low Load
 (2) Part Load


(3) Low Speed / High Load
 (4) High Speed / High Load



Driving
Condition
 Exhaust Valve
 Intake Valve
Valve
Timing
 Effect
 Valve
Timing
 Effect
(1) Low Speed
/Low Load
 Completely
Advance
 * Valve Under-lap
* Improvement of combustion stability
 Completely
Retard
 * Valve Under-lap
* Improvement of combustion stability
(2) Part Load
 Retard
 * Increase of expansion work
* Reduction of pumping loss
* Reduction of HC
 Retard
 * Reduction of pumping loss
(3) Low Speed
/High Load
 Retard
 * Increase of expansion work
 Advance
 * Prevention of intake back flow (Improvement of volumetric efficiency)
(4) High Speed
/High Load
 Advance
 * Reduction of pumping loss
 Retard
 * Improvement of volumetric efficiency

CVVT & Camshaft Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated by the engine oil supplied to the advance or retard chamber in accordance with the CVVT oil control valve con ...

CVVT & Camshaft Removal
   • Use fender covers to avoid damaging painted surfaces. ...

See also:

Brake Booster Vacuum Pressure Sensor Description
In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside t ...

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Accelerator Position Sensor (APS) Installation
1. Install in the reverse order of removal. Accelerator pedal module installation nut: 12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...

Categories

Copyright www.kifomanual.com 2014-2026