Kia Forte: Piston and Connecting Rod Components - Cylinder Block - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Piston and Connecting Rod Components

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cylinder Block / Piston and Connecting Rod Components

1. Piston ring
2. Snap ring
3. Piston pin
4. Piston
5. Connecting rod
6. Connecting rod upper bearing
7. Connecting rod lower bearing
8. Connecting rod bearing cap

Rear Oil Seal Installation
1. Install a new rear oil seal. (1) Apply engine oil on the edge of new oil seal. (2) ...

Piston and Connecting Rod Disassembly
Engine removal is required for this procedure.    • Use fender covers to avoid damaging pain ...

See also:

Parking Brake Cable Installation
1. Install the parking brake cable (A). Tightening torque : 8.8 ~ 14.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft) ...

Windshield Wiper-Washer Switch Installation
1. Install the multifunction switch. 2. Install the clock spring. 3. Install the steering column upper and lowe ...

Vehicle storage. End-of-life vehicle recovery
Vehicle storage Storage for a long period of time If the vehicle is to be stored for several months: Wash and wax the vehicle. Have the wax in the engine compartment and underbody checked. Cl ...

Copyright © www.kifomanual.com 2014-2025