Kia Forte: Cooling Fan Specifications - Cooling System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Cooling Fan Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,224) -10% min.
Fan speed (rpm)
1,850 ±10%
Current (A)
10.0 +10% max.

Cooling Fan Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Cooling Fan Circuit Diagram
...

See also:

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) of the blower motor. 3. Remove ...

Driver Airbag (DAB) Module and Clock Spring
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Copyright www.kifomanual.com 2014-2026