1. Inner roter 2. Outer roter 3. Oil pump cover 4. Relief plunger |
5. Relief spring 6. Relief plug 7. O-ring (suction side) 8. O-ring (discharge side) |
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Accelerator Position Sensor (APS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Front Fog Lamps Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Swit ...