1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Remove the air duct (A).
|
4. |
Disconnect the breather hose (B).
|
5. |
Disconnect the intake hose (C) and air cleaner assembly (D).
|
6. |
Install in the reverse order of removal.
|
1. |
Open the air cleaner cover by unhooking the clamps.
|
2. |
Replace the air cleaner element (A) with a new one.
|
3. |
Close the service cover by hooking the clamps.
|
Hood Latch Release Handle Component Location
1. Hood latch release handle
...
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Low Panal")
...