Kia Forte: Accelerator Position Sensor (APS) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specification
| Accelerator Position |
Output Voltage (V) |
|
| APS1 |
APS2 |
|
| C.T |
0.7 ~ 0.8 |
0.29 ~ 0.46 |
| W.O.T |
3.85 ~ 4.35 |
1.93 ~ 2.18 |
Accelerator Position Sensor (APS) Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine ...
Accelerator Position Sensor (APS) Circuit Diagram
(M/T)
(A/T)
...
See also:
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Towing
If the vehicle needs to be towed, call a professional towing service. Never
tow vehicle with just a rope or chain. It is very dangerous.
Emergency Towing
There are three popula ...
Engine Control Module (ECM) Installation
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Copyright © www.kifomanual.com 2014-2025