Kia Forte: Exhaust Manifold Components

Variable Intake Solenoid(VIS) Actuator Removal and Installation

1. Disconnect the vacuum hose (A). 2. Remove the variable Intake solenoid (VIS) actuator (B) Tightening torque : ...

Exhaust Manifold Removal and Installation

1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the front and rear oxyge ...

See also:

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by the signal from the control unit. Pressing the intake selection switch will shift between recirculation and ...

Water pump Inspection
1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorm ...

Accelerator Position Sensor (APS) Circuit Diagram
(M/T) (A/T) ...