Kia Forte: Description - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Description

Emissions Control System consists of three major systems.
The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
Components Location
[LEV2 Type] [SULEV Type] 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Caniste ...

Schematic Diagram
...

See also:

Front Hub / Knuckle Components
1. Drive shaft coking nut 2. Brake disc 3. Wheel hub assembly 4. Wheel bearing 5. Snap ring 6. Dust cover 7. Knuckle 8. Drive shaft ...

Back up lamp, Rear fog lamp
1. Take the lamp assembly out. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb by ...

Components
(4Door, 5Door) 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Rear wheel house trim 6. Cowl side trim ...

Copyright www.kifomanual.com 2014-2026