Kia Forte: On-board Refueling Vapor Recovery (ORVR) valve Installation - Evaporative Emission Control System - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: On-board Refueling Vapor Recovery (ORVR) valve Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System / On-board Refueling Vapor Recovery (ORVR) valve Installation

1.
Installation is the reverse of removal.
On-board Refueling Vapor Recovery (ORVR) valve Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler ...

See also:

Driving your vehicle
Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the exh ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C control unit. (Refer to Heating,Ventilation, Air Conditi ...

Front Lower Arm Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Copyright � www.kifomanual.com 2014-2026