1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter.
If there is no continuity, replace the oil pressure switch.
...
Water Temperature Control Assembly Removal and Installation
1.
Remove the engine cover.
2.
Drain the engine coolant.
(Refer to Cooling System - "Coolant")
3.
...