Kia Forte: Knock Sensor (KS) Circuit Diagram

Knock Sensor (KS) Specification

Item Specification Capacitance (pF) 850 ~ 1,150 ...

Knock Sensor (KS) Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). ...

See also:

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Spark Plug Specification
Item Specification Type SILZKR7B11 Gap 1.0 ~ 1.1 (0.0394 ~ 0.0433) ...

Rear Oil Seal Installation
1. Install a new rear oil seal. (1) Apply engine oil on the edge of new oil seal. (2) ...