Kia Forte: Purge Control Solenoid Valve (PCSV) Description

Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Installation

   • Install the component with the specified torques. • ...

Purge Control Solenoid Valve (PCSV) Specification

Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

See also:

Setup
Display Settings Press the key Select [Display] through TUNE knob or key Select menu through TUNE knob Mode Pop up [Mode Pop up] Changes / selection mode During On stat ...

Blower Resistor Inspection
1. Measure terminal-to-terminal resistance of the blower resistor. 2. If the measured resistance is not within specification, the blower re ...

Canister Close Valve (CCV) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...