1. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
2. |
Remove the rear seat cushion (Refer to “Seat” in BD group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure
sensor connector (B).
|
5. |
Disconnect the fuel feed tube quick connector (C).
|
6. |
Remove the rear - LH wheel & tire.
|
7. |
Lift the vehicle and support the fuel tank with a jack.
|
8. |
Disconnect the fuel filler hose (A).
|
9. |
Disconnect the vapor tube quick-connector (A).
|
10. |
Remove the under cover (A) after loosening the mounting nuts.
|
11. |
Remove the fuel tank from the vehicle after removing the fuel
tank band.
|
12. |
Remove the fuel tank from the vehicle after removing the fuel
tank band (A).
|
Rear Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Side outer p ...
Compression Pressure Inspection
If the there is lack of power, excessive oil consumption or poor
fuel economy, measure the compression pressure.
...
Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...