Kia Forte: Removal - Concentric Slave Cylinder Assembly - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Concentric Slave Cylinder Assembly / Removal

1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the concentric slave cylinder assembly from the transaxle case by removing bolts (A).

Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

Component
1. Concentric slave cylinder assembly 2. Manual transaxle ...

Installation
   • Install the concentric slave cylinder bolts. Not to be bent or twisted, Tighten them ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Direct control VFS[OD/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Canister Close Valve (CCV) Specification
Item Specification Coil Resistance (Ω) 19.5 ~ 22.5 [20°C(68°F) ...

CVVT Oil Control Valve (OCV) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...

Copyright www.kifomanual.com 2014-2026