Kia Forte: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description

Underdrive Brake(UD/B) Control Solenoid is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Underdrive Brake(UD/B).

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[UD/B] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

See also:

Purge Control Solenoid Valve (PCSV) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performan ...

Fuel Pump Motor Installation
1. Install in the reverse order of removal. ...