Kia Forte: Removal - TPMS Sensor - Tire Pressure Monitoring System - Suspension System - Kia Forte TD 2014-2019 Service ManualKia Forte: Removal

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor / Removal

  
Handle the sensor with care.
1.
Remove the tire.
(Refer to Tire/Wheels - "Tire")
2.
Remove the valve nut.

  
The valve nut should not be re-used.
3.
Discard the valve assembly.
TPMS Sensor
1. Storage State Sensors are in this state when they first arrive at dealership. This state is entered by LF request/command only. Either LF request ...

Installation
Sensor Fit    Х Handle the sensor with care. Х ...

See also:

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignitio ...

Variable Intake Solenoid (VIS) Valve Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector ( ...

Specification
Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.75 ± 15% [20∞C (68∞F)] Secondary Coil Resis ...

Copyright © www.kifomanual.com 2014-2019