Kia Forte: Tire Pressure Monitoring System

Hub nut tightening sequence

Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Components

1. Receiver 2. TPMS Sensor 3. TPMS Sensor 4. TPMS Sensor 5. TPMS Sensor ...

See also:

Rear Torsion Beam Axle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...

Tail Gate Trim Replacement
(5Door) [Tail gate upper trim]    • When prying with a flat-tip screwd ...