Kia Forte: Driveshaft and axle

Shift Cable Adjustment

1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

Specification

Engine T/M Joint type Max . permissible angle Outer Inner Outer Inner Nu 1.8 MPI 6 M/T BJ#22 TJi#22 ...

See also:

Illuminated ignition switch (if equipped)
Whenever a front door is opened, the ignition switch will illuminate for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the igni ...

Components Location
[LEV2 Type] [SULEV Type] 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Caniste ...

Hazard Lamp Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel. (Refer to Body - "Center Fascia Panel") ...