Kia Optima Manuals

Kia Forte: Seat Heater (Air Ventilation) Inspection - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Seat Heater (Air Ventilation) Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Seat Heater (Air Ventilation) Inspection

Front Seat Heater (Driver)
1.
Check for continuity and measure the resistance between terminals.

No.
 Description
 No.
 Description
1
 -
 6
 NTC +
2
 Ground
 7
 Power
3
 Heater cushion
 8
 NTC -
4
 Heater back
 9
 Back blower
5
 -
 10
 Cushion blower

Standard value (Fabric/ Leather)
Cushion : 5.86Ω ± 10%
Back : 4.19Ω ± 10%
Set : 10.05Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.

 1st
 2nd
 3rd
Cushion
(±2°C)
 36°C
 39°C
 42°C
Back
(±2°C)
 40°C
 45°C
 50°C

Seat Heater (Air Ventilation) Circuit Diagram
...

Seat Heater (Non-Air Ventilation) Component Location
...

See also:

SS-B Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω ...

Heated Oxygen Sensor (HO2S) Installation
   • Install the component with the specified torques. • ...

Inspection
Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cov ...

Categories

Copyright www.kifomanual.com 2014-2026