Kia Forte: Front Hub / Knuckle Reassembly
|
1. |
Install the hub bearing to the knuckle assembly.
|
(1) |
Lay the knuckle assembly (A) on press.
|
|
(2) |
Lay a new hub bearing upon the knuckle assembly (A).
|
|
(3) |
Lay a suitable adapter (B) upon the hub bearing.
|
|
(4) |
Install the hub bearing to the knuckle assembly by using
press.
|
|
- |
Do not press against the inner race of the hub
bearing because that can cause damage to the bearing
assembly.
|
|
- |
Always use a new wheel bearing assembly.
|
|
|
|
2. |
Install the hub assembly to the knuckle assembly.
|
(1) |
Lay the hub assembly (A) upon a suitable adapter .
|
|
(2) |
Lay the knuckle assembly (B) upon the hub assembly (A).
|
|
(3) |
Lay a suitable adapter (C) upon the hub bearing.
|
|
(4) |
Install the hub assembly (A) to the knuckle assembly (B)
by using press.
|
|
Do not press against the inner race of the hub bearing
because that can cause damage to the bearing assembly.
|
|
|
3. |
Install the snap ring (A).
|
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring t ...
Steering Column and Shaft Replacement
1.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
2.
Remove the steering column shroud.
(Ref ...
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambie ...
Front Hub / Knuckle Disassembly
Front Hub / Knuckle Inspection