Kia Forte: Front Hub / Knuckle Inspection - Front Axle Assembly - Driveshaft and axle - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Hub / Knuckle Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Inspection

1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
Check the knuckle for cracks.
4.
Check the bearing for cracks or damage.
Front Hub / Knuckle Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) ...

Front Hub / Knuckle Installation
1. Install in the reverse order of removal.    Use a SST (09581-11000) when ...

See also:

Transaxle Control Module (TCM) Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harne ...

Cooling Fan Disassembly
1. Remove the cooling fan (A) from the cooling fan assembly. 2. Disconnect the fan motor connector (A) from the resistor. ...

Front Seat Shield Outer Cover Replacement
(4Door, 5Door)    • Put on gloves to protect your hands. ...

Copyright © www.kifomanual.com 2014-2024