Kia Forte: Inpection - Heated Steering wheel - Steering wheel - Steering System - Kia Forte TD 2014-2018 Service ManualKia Forte: Inpection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Steering System / Steering wheel / Heated Steering wheel / Inpection

1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance - 10.0 kΩ ± 10% (25°C)
B.
Heated pad resistance - 1.88 Ω ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)

System Circuit Diagram
Terminal Function No. Function Wire color 1 GND Back 2 IG2 Red 3 Switch Signal White ...

Electric Power Steering
...

See also:

Rear Seat Belt Retractor Replacement
(4Door, 2Door)    • When installing the belt, make sure not to damage the re ...

Multimedia Jack Installation
1. Install the multimedia jack. 2. Connect the multimedia jack connector. 3. Install the floor console assembly ...

Ambient Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect ambient temperature sensor. 3. Check the resistance of the ambie ...

Copyright www.kifomanual.com 2014-2026