Kia Forte: Front Impact Sensor (FIS)

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding

After replacing the SRSCM with a new unit, the “Variant Codingâ€� procedure must be performed.    1. ...

Components

...

See also:

Installation
1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring ...

Circuit Diagram
...

TCM Terminal Input/ Output Signal
Connector [A] Pin Description Condition Input/output value Type Level 1 - 　 　 　 ...