(4Door, 5Door, 2Door) |
1. |
Remove the front door module.
(Refer to Front Door - "Front Door Module")
|
2. |
Disconnect the front door latch connectors (A).
|
3. |
Remove the front door inside handle cable (A) by pulling it and
then remove the front door latch assembly (B).
|
4. |
Install in the reverse order of removal.
|
Specifications
Item
Specification
Master cylinder
Type
Fixed seal
Cylinder I.D.
22.22 mm
Piston stroke
45 ± 1 mm (1.77 ± 0.039 in)
...
Replacement
•
Put on gloves to protect your hands.
&n ...
Seat Heater Switch Installation
Driver/Passenger Seat
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
...