1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
|
3. |
Disconnect the connector (A) from the high mounted stop lamp assembly.
|
4. |
Remove the high mounted stop lamp assembly (A) after loosening
the mounting bolts.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear package tray trim.
(Refer to Body - "Rear Package Tray Trim")
|
3. |
Remove the high mounted stop lamp assembly (A) after loosening
the screws.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler)
|
3. |
Remove the high mounted stop lamp (A) after loosening the mounting
screws.
|
Heater & A/C Control Unit (DATC) Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel blinks three times every 0.5 second, the
...
Variable Charge Motion Actuator (VCMA) Installation
•
Install the component with the specified torques.
•
...
Specifications
Item
Specifications
Transaxle type
A6GF1
Engine model
Gasoline 1.8 MPI
Torque converter type
3-element, 1-stage, 2-phase type
...