Kia Forte: High Mounted Stop Lamp Installation - Lighting System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: High Mounted Stop Lamp Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp Installation

[2 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the roof trim assembly.
[4 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the rear package tray trim.
[5 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the rear spoiler.
High Mounted Stop Lamp Removal
[2 Door] 1. Disconnect the negative (-) battery terminal. 2. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly&qu ...

Rear Combination Lamp Removal
Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). ...

See also:

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling up the fuel filler lid opener. If the fuel filler lid does not open because ice has formed around it, tap lightly or push o ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Sunroof Deflector Replacement
1. Open the glass fully. 2. Remove the mounting pins (C), from the frame (B), and then remove the deflector (A). ...

Copyright � www.kifomanual.com 2014-2026