Kia Forte: Inspection - Clutch Switch - Clutch System - Kia Forte TD 2014-2019 Service ManualKia Forte: Inspection

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Clutch System / Clutch Switch / Inspection

Component Inspection
1.
Remove the clutch switch.
(Refer to Clutch Switch - "Removal")
2.
Push the clutch switch in the direction of the arrow to make sure that continuity is cut off.

  
Condition
Clutch Pedal pressed
Clutch Pedal Released
Switch Operation
ON (below 1.0Ω )
OFF ( Infinite Ω )

Specifications
Item Specifications Working voltage  DC 12V Operating force 9.8 ± 2.9N (1.0 ± 0.3kg, 7.2 ± 0.7lb) Voltage drop -0.4V ...

Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the smart junction box (Refer to Body Electri ...

See also:

Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performan ...

Relay Box (Passenger Compartment) Installation
1. Install the smart junction box. 2. Install the crash pad lower panel. 3. Check that all system operates norm ...

Injector Installation
   Х Install the component with the specified torques. Х ...

Copyright © www.kifomanual.com 2014-2019