Kia Optima Manuals

Kia Forte: Rear Shelf Side Trim Replacement - Interior Trim - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Shelf Side Trim Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Shelf Side Trim Replacement

(5Door)
  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Fold the rear seat back assembly.
2.
Remove the rear shelf side trim mounting caps.
3.
After loosening the mounting bolts, then remove the rear shelf side trim (A).
4.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
Rear Shelf Side Trim Component Location
(5Door) 1. Rear shelf side trim ...

Rear Transverse Trim Component Location
(5Door) 1. Rear transverse trim ...

See also:

Intake Air Temperature Sensor (IATS) Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air tem ...

Cowl Cross Bar Assembly Replacement
   • Put on gloves to protect your hands. ...

Blower Resistor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the blower resistor connector (A) and then remove the blower resistor (B) af ...

Categories

Copyright www.kifomanual.com 2014-2026