Kia Forte: Rear Spoiler Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Put on gloves to protect your hands.
|
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Remove the tail gate upper trim.
(Refer to Tail Gate - "Tail Gate Trim")
|
|
2. |
Disconnect the washer nozzle hose (A) and high mounted stop lamp
connector (B).

|
|
4. |
Loosen the rear spoiler mounting nuts (B).
Tightening torque :
5.9 ~ 6.4 N.m (0.6 ~ 0.65 kgf.m, 4.3 ~ 4.7 lb-ft)
|

|
|
5. |
Remove the rear spoiler (A).

|
|
6. |
Install in the reverse order of removal.
|
• |
Make sure the connector is connected properly.
|
|
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
& ...
See also:
Accelerator Position Sensor (APS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Radiator Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
2.
...
Replacement
•
Be careful not to damage the fender and body.
...