(5Door) |
|
|
1. |
Remove the luggage tray covering trim (A).
[Lower Sied]
[Upper Sied]
|
2. |
Remove the luggage center tray trim (A).
|
3. |
After loosening the mounting screws, then remove the luggage tray
side trim (A).
|
4. |
Using a clip remover, detach the rear transverse trim mounting
clips (A).
|
5. |
Using a screwdriver or remover, remove the rear transverse trim
(B).
|
6. |
Install in the reverse order of removal.
|
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...
Front Pillar Trim Component Location
1. Front pillar trim
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...